AHS-YS
容许扭矩最大增至150%※
Allowable torque increased up to 150%
与传统产品相比，通过提高容许扭矩值，可减小联轴器的尺寸。
The size of the coupling can be reduced by increasing the allowable torque value compared to conventional products.
※ 与本公司传统产品相比
容许扭矩比较表 Allowable Torque Comparison Table
传统产品
Conventional Product
新形状
New Shape
型号
Model
容许扭矩
Allowable Torque
N・m
型号
Model
容许扭矩
Allowable Torque
N・m
AHS-65 80 AHS-68 120
- - AHS-78 250
AHS-87 250 AHS-88 350
AHS-100 350 AHS-104 550
采用同一方向的侧向锁紧结构，安装时间减少了一半
Installation time reduced by half by adopting the same direction side clamp structure
通过将锁紧螺栓平行设置，可从同一方向 紧固锁紧螺栓，作业效率得到提高。
The work efficiency is improved because the lock bolts can be tightened from the same direction by arranging the lock bolts in parallel.
锁紧螺栓采用同一方向，组装作业效率提高!
The operability for assembly is improved by making the direction of the lock bolts the same!
扭转弹簧常数最大增至210%※
Torsion spring constant increased up to 210%
通过改进板簧形状并增加板簧锁紧力，扭转弹簧常数提高至传统产品的约1.6~2.1倍。
By reviewing the leaf spring shape and increasing the leaf spring clamping force, the torsion spring constant is improved by about 1.6 to 2.1 times compared to the conventional products.
※ 与本公司传统产品相比
扭转弹簧常数比较表 Torsion Spring Constant Comparison Table
传统产品
Conventional Product
新形状
New Shape
型号
Model
扭转弹簧常数
Torsion Spring Constant
N・m/rad
型号
Model
扭转弹簧常数
Torsion Spring Constant
N・m/rad
AHS-65 120000 AHS-68 260000
- - AHS-78 440000
AHS-87 330000 AHS-88 500000
AHS-100 420000 AHS-104 750000
规格、结构图 Specifications / Structure
型号
Model
d1・d2 选择(其中d1≦d2)
d1 & d2 Selection (Here, d1≤d2)
D
D2
L
L2
LL
最大容许扭矩
Max. Allowable Torque
N・m
容许偏角
Allowable Declination
°
容许轴向游隙
Allowable End Play
mm
扭转弹簧常数
Torsion Spring Constant
N・m/rad
轴向弹簧常数
Axial Spring Constant
N/mm
惯性力矩
Moment of Inertia
Kg・m2
重量
Weight
Kg
AHS-68 18・19・20・22・24・25・28・30・32・35 68 47(~22)64(24~) 56.1 25 6.1 120 1.0 0.50 260000 202 6.45×10-4 0.94
AHS-78 22・24・25・28・30・32・35 78 71 66.4 30 6.4 250 1.0 0.55 440000 314 1.31×10-3 1.57
AHS-88 25・28・30・32・35・38・40・42 88 81 67.0 30 7.0 350 1.0 0.60 500000 146 2.33×10-3 2.10
AHS-104 32・35・38・40・42・45・48・50 104 98 84.2 38 8.2 550 1.0 0.75 750000 170 5.67×10-3 3.60
型号
Model
d1・d2
锁紧螺栓
Lock Bolt
18
19
20
22
24
25
28
30
32
35
38
40
42
45
48
50
尺寸
Size
紧固扭矩
Tightening Torque
N・m
AHS-68 90 90 100 100 120 120 120 120 120 120 M6 15
AHS-78 250 250 250 250 250 250 250 M8・M6(32・35) 34
AHS-88 330 350 350 350 350 350 350 350 M8 34
AHS-104 550 550 550 550 550 550 550 550 M10 60